home *** CD-ROM | disk | FTP | other *** search
- ••••••••••••••••••••• DS Error Table
- 1 dsBusError bus error
- 2 dsAddressErr address error
- 3 dsIllInstErr illegal instruction error
- 4 dsZeroDivErr zero divide error
- 5 dsChkErr check trap error
- 6 dsOvflowErr overflow trap error
- 7 dsPrivErr privelege violation error
- 8 dsTraceErr trace mode error
- 9 dsLineAErr line 1010 trap error
- 10 dsLineFErr line 1111 trap error
- 11 dsMiscErr miscellaneous hardware exception error
- 12 dsCoreErr unimplemented core routine error
- 13 dsIrqErr uninstalled interrupt error
- 14 dsIOCoreErr IO Core Error
- 15 dsLoadErr Segment Loader Error
- 16 dsFPErr Floating point error
- 17 dsNoPackErr package 0 not present
- 18 dsNoPk1 package 1 not present
- 19 dsNoPk2 package 2 not present
- 20 dsNoPk3 package 3 not present
- 21 dsNoPk4 package 4 not present
- 22 dsNoPk5 package 5 not present
- 23 dsNoPk6 package 6 not present
- 24 dsNoPk7 package 7 not present
- 25 dsMemFullErr out of memory!
- 26 dsBadLaunch can't launch file
- 27 dsFSErr file system map has been trashed
- 28 dsStknHeap stack has moved into application heap
- 30 dsReinsert request user to reinsert off-line volume
- 31 dsNotThe1 not the disk I wanted
- 33 negZcbFreeErr ZcbFree has gone negative
- 40 dsGreeting welcome to Macintosh greeting
- 41 dsFinderErr can't load the Finder error
- 42 shutDownAlert handled like a shutdown error
- 51 dsBadSlotInt unserviceable slot interrupt
- 81 dsBadSANEopcode bad opcode given to SANE Pack4
- 84 menuPrgErr happens when a menu is purged
- 85 dsMBarNFnd Menu Manager Errors
- 86 dsHMenuFindErr Menu Manager Errors
- 32767 dsSysErr general system error
-
- ••••••••••••••••••••• Slot Declaration ROM Manager Errors
- 1 siInitSDTblErr slot int dispatch table could not be initialized.
- 2 siInitVBLQsErr VBLqueues for all slots could not be initialized.
- 3 siInitSPTblErr slot priority table could not be initialized.
- 10 sdmJTInitErr SDM Jump Table could not be initialized.
- 11 sdmInitErr SDM could not be initialized.
- 12 sdmSRTInitErr Slot Resource Table could not be initialized.
- 13 sdmPRAMInitErr Slot PRAM could not be initialized.
- 14 sdmPriInitErr Cards could not be initialized.
-
- ••••••••••••••••••••• SCSI Manager Errors
- 2 scCommErr Communications error (operations timeout)
- 3 scArbNBErr Arbitration failed during SCSIGet – Bus busy
- 4 scBadparmsErr Bad parameter or TIB opcode
- 5 scPhaseErr SCSI bus not in correct phase for operation
- 6 scCompareErr SCSI Manager busy with another operation when
- SCSIGet was called
- 7 scMgrBusyErr SCSI Manager busy with another operation when
- SCSIGet was called
- 8 scSequenceErr Attempted operation is out of sequence – e.g.,
- calling SCSISelect before doing SCSIGet
- 9 scBusTOErr Bus timeout before data ready on SCSIRBlind and
- SCSIWBlind
- 10 scComplPhaseErr SCSIComplete failed – bus not in Status phase
-
- ••••••••••••••••••••• Serial Driver Error Masks
- 1 swOverrunErr
- 16 parityErr
- 31 hwOverrunErr
- 64 framingErr
-
- ••••••••••••••••••••• General System Errors (VBL Mgr, Queueing, Etc.)
- 0 noErr 0 for success
- -1 qErr queue element not found during deletion
- -2 vTypErr invalid queue element
- -3 corErr core routine number out of range
- -4 unimpErr unimplemented core routine
- -8 seNoDB no debugger installed to handle debugger command
-
- ••••••••••••••••••••• Color Manager Errors
- -9 iTabPurgErr from Color2Index/ITabMatch
- -10 noColMatch from Color2Index/ITabMatch
- -11 qAllocErr from MakeITable
- -12 tblAllocErr from MakeITable
- -13 overRun from MakeITable
- -14 noRoomErr from MakeITable
- -15 seOutOfRange from SetEntry
- -16 seProtErr from SetEntry
- -17 i2CRangeErr from SetEntry
- -18 gdBadDev from SetEntry
- -19 reRangeErr from SetEntry
- -20 seInvRequest from SetEntry
- -21 seNoMemErr from SetEntry
-
- ••••••••••••••••••••• I/O System Errors
- -17 controlErr
- -18 statusErr
- -19 readErr
- -20 writErr
- -21 badUnitErr
- -22 unitEmptyErr
- -23 openErr
- -24 closErr
- -25 dRemovErr tried to remove an open driver
- -26 dInstErr DrvrInstall couldn't find driver in resources
- -27 abortErr IO call aborted by KillIO
- -27 iIOAbortErr IO abort error (Printing Manager)
- -28 notOpenErr Couldn't rd/wr/ctl/sts cause driver not opened
- -29 unitTblFullErr unit table has no more entries
- -30 dceExtErr dce extension error
-
- ••••••••••••••••••••• File System Errors
- -33 dirFulErr Directory full
- -34 dskFulErr disk full
- -35 nsvErr no such volume
- -36 ioErr I/O error (bummers)
- -37 bdNamErr there may be no bad names in the final system!
- -38 fnOpnErr File not open
- -39 eofErr End of file
- -40 posErr tried to position to before start of file (r/w)
- -41 mFulErr memory full (open) or file won't fit (load)
- -42 tmfoErr too many files open
- -43 fnfErr File not found
- -44 wPrErr diskette is write protected
- -45 fLckdErr file is locked
- -46 vLckdErr volume is locked
- -47 fBsyErr File is busy (delete)
- -48 dupFNErr duplicate filename (rename)
- -49 opWrErr file already open with with write permission
- -50 paramErr error in user parameter list
- -51 rfNumErr refnum error
- -52 gfpErr get file position error
- -53 volOffLinErr volume not on line error (was Ejected)
- -54 permErr permissions error (on file open)
- -55 volOnLinErr drive volume already on-line at MountVol
- -56 nsDrvErr no such drive (tried to mount a bad drive num)
- -57 noMacDskErr not a mac diskette (sig bytes are wrong)
- -58 extFSErr volume in question belongs to an external fs
- -59 fsRnErr file system internal error: during rename the old
- entry was deleted but could not be restored…
- -60 badMDBErr bad master directory block
- -61 wrPermErr write permissions error
-
- ••••••••••••••••••••• Font Manager Error Codes
- -64 fontDecError error during font declaration
- -65 fontNotDeclared font not declared
- -66 fontSubErr font substitution occured
-
- ••••••••••••••••••••• Disk, Serial Ports, Clock Specific Errors
- -64 lastDskErr
- -64 noDriveErr drive not installed
- -65 offLinErr r/w requested for an off-line drive
- -66 noNybErr couldn't find 5 nybbles in 200 tries
- -67 noAdrMkErr couldn't find valid addr mark
- -68 dataVerErr read verify compare failed
- -69 badCksmErr addr mark checksum didn't check
- -70 badBtSlpErr bad addr mark bit slip nibbles
- -71 noDtaMkErr couldn't find a data mark header
- -72 badDCksum bad data mark checksum
- -73 badDBtSlp bad data mark bit slip nibbles
- -74 wrUnderrun write underrun occurred
- -75 cantStepErr step handshake failed
- -76 tk0BadErr track 0 detect doesn't change
- -77 initIWMErr unable to initialize IWM
- -78 twoSideErr tried to read 2nd side on a 1-sided drive
- -79 spdAdjErr unable to correctly adjust disk speed
- -80 seekErr track number wrong on address mark
- -81 sectNFErr sector number never found on a track
- -82 fmt1Err can't find sector 0 after track format
- -83 fmt2Err can't get enough sync
- -84 verErr track failed to verify
- -84 firstDskErr
- -85 clkRdErr unable to read same clock value twice
- -86 clkWrErr time written did not verify
- -87 prWrErr parameter ram written didn't read-verify
- -88 prInitErr InitUtil found the parameter ram uninitialized
- -89 rcvrErr SCC receiver error (framing, parity, OR)
- -90 breakRecd Break received (SCC)
-
- ••••••••••••••••••••• AppleTalk error codes
- -91 ddpSktErr error in soket number
- -92 ddpLenErr data length too big
- -93 noBridgeErr no network bridge for non-local send
- -94 lapProtErr error in attaching/detaching protocol
- -95 excessCollsns excessive collisions on write
- -97 portInUse driver Open error code (port is in use)
- -98 portNotCf driver Open error code (parameter RAM not
- configured for this connection)
- -99 memROZErr hard error in ROZ
- -99 memROZWarn soft error in ROZ
-
- ••••••••••••••••••••• Scrap Manager error codes
- -100 noScrapErr No scrap exists error
- -102 noTypeErr No object of that type in scrap
-
- ••••••••••••••••••••• Storage allocator error codes
- -108 memFullErr Not enough room in heap zone
- -109 nilHandleErr Handle was NIL in HandleZone or other
- -110 memAdrErr address was odd, or out of range
- -111 memWZErr WhichZone failed (applied to free block)
- -112 memPurErr trying to purge a locked or non-purgeable block
- -113 memAZErr Address in zone check failed
- -114 memPCErr Pointer Check failed
- -115 memBCErr Block Check failed
- -116 memSCErr Size Check failed
- -117 memLockedErr trying to move a locked block (MoveHHi)
-
- ••••••••••••••••••••• New system error codes
- -120 dirNFErr Directory not found
- -121 tmwdoErr No free WDCB available
- -122 badMovErr Move into offspring error
- -123 wrgVolTypErr Wrong volume type error
- [operation not supported for MFS]
- -124 volGoneErr Server volume has been disconnected.
- -125 updPixMemErr insufficient memory to update a pixmap
-
- ••••••••••••••••••••• Menu Manager
- -126 mBarNFnd system error code for MBDF not found
- -127 hMenuFindErr could not find HMenu's parent in MenuKey
-
- ••••••••••••••••••••• Color Quickdraw & Color Manager Errors
- -150 cMatchErr Color2Index failed to find an index
- -151 cTempMemErr failed to allocate memory for temporary structures
- -152 cNoMemErr failed to allocate memory for structure
- -153 cRangeErr range error on colorTable request
- -154 cProtectErr colorTable entry protection violation
- -155 cDevErr invalid type of graphics device
- -156 cResErr invalid resolution for MakeITable
-
- ••••••••••••••••••••• Resource Manager errors (other than I/O errors)
- -192 resNotFound Resource not found
- -193 resFNotFound Resource file not found
- -194 addResFailed AddResource failed
- -195 addRefFailed AddReference failed
- -196 rmvResFailed RmveResource failed
- -197 rmvRefFailed RmveReference failed
- -198 resAttrErr attribute inconsistent with operation
- -199 mapReadErr map inconsistent with operation
-
- ••••••••••••••••••••• Sound Manager Error Returns
- -200 noHardware No hardware support for the specified synthesizer
- -201 notEnoughHardware No more channels for the specified synthesizer
- -203 queueFull No more room in queue
- -204 resProblem Problem loading resource
- -205 badChannel Invalid channel queue length
- -206 badFormat Handle to 'snd ' resource was invalid
-
- ••••••••••••••••••••• Errors specific to the start mgr.
- -290 smSDMInitErr SDM could not be initialized.
- -291 smSRTInitErr Slot Resource Table could not be initialized.
- -292 smPRAMInitErr Slot Resource Table could not be initialized.
- -293 smPriInitErr Cards could not be initialized.
- -300 smEmptySlot No card in slot
- -301 smCRCFail CRC check failed for declaration data
- -302 smFormatErr FHeader Format is not Apple's
- -303 smRevisionErr Wrong revison level
- -304 smNoDir Directory offset is Nil
- -305 smLWTstBad Long Word test field <> $5A932BC7.
- -306 smNosInfoArray No sInfoArray. Memory Mgr error.
- -307 smResrvErr Fatal reserved error. Reserved field <> 0.
- -308 smUnExBusErr Unexpected BusError
- -309 smBLFieldBad ByteLanes field was bad.
- -310 smFHBlockRdErr Error occured during _sGetFHeader.
- -311 smFHBlkDispErr Error occured during _sDisposePtr (Dispose of
- FHeader block).
- -312 smDisposePErr _DisposePointer error
- -313 smNoBoardsRsrc No Board sResource.
- -314 smGetPRErr Error occured during _sGetPRAMRec (See SIMStatus).
- -315 smNoBoardId No Board Id.
- -316 smIntStatVErr The InitStatusV field was negative after primary
- or secondary init.
- -317 smIntTblVErr An error occured while trying to initialize the
- Slot Resource Table.
- -318 smNoJmpTbl SDM jump table could not be created.
- -319 smBadBoardId BoardId was wrong, re-init the PRAM record.
- -320 smBusErrTO BusError time out.
- -330 smBadRefId Reference Id not found in List
- -331 smBadsList Bad sList: Id1<Id2<Id3 … format is not followed.
- -332 smReservedErr Reserved field not zero
- -333 smCodeRevErr Code revision is wrong
- -334 smCPUErr Code revision is wrong
- -335 smsPointerNil LPointer is nil {From sOffsetData. If this error
- occurs, check sInfo rec for more information.}
- -336 smNilsBlockErr Nil sBlock error {Dont allocate and try to use a
- nil sBlock}
- -337 smSlotOOBErr Slot out of bounds error
- -338 smSelOOBErr Selector out of bounds error
- -339 smNewPErr _NewPtr error
- -340 smBlkMoveErr _BlockMove error
- -341 smCkStatusErr Status of slot = fail.
- -342 smGetDrvrNamErr Error occured during _sGetDrvrName.
- -343 smDisDrvrNamErr Error occured during _sDisDrvrName.
- -344 smNoMoresRsrcs No more sResources
- -345 smsGetDrvrErr Error occurred during _sGetDriver.
- -346 smBadsPtrErr Bad pointer was passed to sCalcsPointer
- -347 smByteLanesErr NumByteLanes was determined to be zero.
- -348 smOffsetErr Offset was too big (temporary, should be fixed)
- -349 smNoGoodOpens No opens were successfull in the loop.
- -350 smSRTOvrFlErr SRT over flow.
- -351 smRecNotFnd Record not found in the SRT.
-
- ••••••••••••••••••••• Device Manager Slot Support Error
- -360 slotNumErr invalid slot # error
-
- ••••••••••••••••••••• AppleTalk - NBP error codes
- -1024 nbpBuffOvr Buffer overflow in LookupName
- -1025 nbpNoConfirm Name not confirmed on ConfirmName
- -1026 nbpConfDiff Name confirmed at different socket
- -1027 nbpDuplicate Duplicate name exists already
- -1028 nbpNotFound Name not found on remove
- -1029 nbpNISErr Error trying to open the NIS
-
- ••••••••••••••••••••• ASP errors codes (XPP driver)
- -1066 aspBadVersNum Server cannot support this ASP version
- -1067 aspBufTooSmall Buffer too small
- -1068 aspNoMoreSess No more sessions on server
- -1069 aspNoServers No servers at that address
- -1070 aspParamErr Parameter error
- -1071 aspServerBusy Server cannot open another session
- -1072 aspSessClosed Session closed
- -1073 aspSizeErr Command block too big
- -1074 aspTooMany Too many clients (server error)
- -1075 aspNoAck No ack on attention request (server err)
-
- ••••••••••••••••••••• AppleTalk - ATP error codes
- -1096 reqFailed SendRequest failed: retry count exceeded
- -1097 tooManyReqs Too many concurrent requests
- -1097 tooManySkts Too many concurrent responding-sockets
- -1099 badATPSkt Bad ATP-responding socket
- -1100 badBuffNum Bad response buffer number specififed
- -1101 noRelErr No release received
- -1102 cbNotFound Control Block (TCB or RspCB) not found
- -1103 noSendResp AddResponse issued without SendResponse
- -1104 noDataArea No data area for request to MPP
- -1105 reqAborted SendRequest aborted by RelTCB
-
- -3101 buf2SmallErr
- -3102 noMPPErr
- -3103 ckSumErr
- -3104 extractErr
- -3105 readQErr
- -3106 atpLenErr
- -3107 atpBadRsp
- -3108 recNotFnd
- -3109 sktClosedErr
-
- ••••••••••••••••••••• Print Manager w/LaserWriter
- -4096 ??? No free Connect Control Blocks available
- -4097 ??? Bad connection reference number
- -4098 ??? Request already active
- -4099 ??? Write request too big
- -4100 ??? Connection just closed
- -4101 ??? Printer not found, or closed
-
- ••••••••••••••••••••• AFP errors codes (XPP driver)
- -5000 afpAccessDenied
- -5001 afpAuthContinue
- -5002 afpBadUAM
- -5003 afpBadVersNum
- -5004 afpBitmapErr
- -5005 afpCantMove
- -5006 afpDenyConflict
- -5007 afpDirNotEmpty
- -5008 afpDiskFull
- -5009 afpEofError
- -5010 afpFileBusy
- -5011 afpFlatVol
- -5012 afpItemNotFound
- -5013 afpLockErr
- -5014 afpMiscErr
- -5015 afpNoMoreLocks
- -5016 afpNoServer
- -5017 afpObjectExists
- -5018 afpObjectNotFound
- -5019 afpParmErr
- -5020 afpRangeNotLocked
- -5021 afpRangeOverlap
- -5022 afpSessClosed
- -5023 afpUserNotAuth
- -5024 afpCallNotSupported
- -5025 afpObjectTypeErr
- -5026 afpTooManyFilesOpen
- -5027 afpServerGoingDown
- -5028 afpCantRename
- -5029 afpDirNotFound
- -5030 afpIconTypeError
-
- ••••••••••••••••••••• SysEnvirons Errors
- -5500 envNotPresent SysEnvirons trap not present - returned by glue.
- -5501 envBadVers Version non-positive
- -5502 envVersTooBig Version bigger than call can handle
- •••••••••••••••••••••
- This list started from MPW 2.0 SysErr.a
- •••••••••••••••••••••
-
.iso/Desk Accessories/Programming Tools/SysErrTableDA/SysErrTableDA.rsrc/wctb_-15392.png){kind=link}